Online Tools
Browser-based tools. Nothing to install.
Drive Configuration
Connect to the drive over RS232 and read or write settings directly from the page, including a gear-ratio calculator for pulse mode.
Important
Works only in Chrome, Edge, or Opera on a desktop computer — it needs the Web Serial API. Other browsers and phones fall back to a demo mode that looks the same but does not touch real hardware.
RFID reader test
Connect an RFID reader over RS485 to read tag UIDs, drive the indicator lights and buzzer, and set the device address and baud rate — all from the browser.
For readers that speak Modbus RTU. It includes a scan button that walks the address range when you do not know what the reader is set to, and a raw-frame box for commands that have no button.
Tip
Press a light button first. If the light on the reader responds, your wiring and settings are already correct — with no tag needed. That separates a wiring problem from a tag problem right at the start.
AGV melody box test
Melody Box, model AMR-SPK-5-24-RS485 — trigger sounds and set the volume from the
browser, so you can find which sound is in which folder before wiring it in.
Supports both the factory-default custom protocol and Modbus RTU.
Warning
🔴 The announcer runs at 9600 baud, not 115200 — unlike the other devices here. Set it wrong and nothing replies at all.
Robot device map — each device gets its own register-map strip (which ranges are writable, read-only, or undocumented), its position on the robot, and a bus scan showing which devices answer · Open